Engine Oil Capacity Chart by Vehicle (2026): Quarts and Oil Type
Quick Answer: Most four-cylinder cars take 3.5 to 5 quarts of oil with a filter change, V6 engines take 5 to 6.5 quarts, and V8 trucks take 7 to 9 quarts. Always fill to the dipstick mark, not the chart number, and use the viscosity grade listed on your oil cap or in your owner’s manual.
This chart lists oil capacity with filter, the correct viscosity, and the filter part family for the most-searched vehicles in America. It is pulled from owner’s manual data and updated for 2026 model years.
Bookmark this page: we also link the full step-by-step oil change guide for most of these vehicles, so you can go straight from capacity to job.
Engine Oil Capacity Chart by Vehicle
Capacities include a new filter. “Typical years” covers the generations most common on the road in 2026. If your exact engine is not listed, use the closest engine family and verify on the dipstick.
| Vehicle | Engine | Capacity (w/ filter) | Oil Type | Typical Years |
|---|---|---|---|---|
| Honda Civic | 1.5L Turbo | 3.4 qt | 0W-20 | 2016-2026 |
| Honda Accord | 1.5L Turbo | 3.7 qt | 0W-20 | 2018-2026 |
| Honda Accord | 2.0L Turbo | 5.7 qt | 0W-20 | 2018-2026 |
| Honda CR-V | 1.5L Turbo | 3.7 qt | 0W-20 | 2017-2026 |
| Toyota Camry | 2.5L I4 | 4.6 qt | 0W-16 | 2018-2026 |
| Toyota Corolla | 2.0L I4 | 4.4 qt | 0W-16 | 2020-2026 |
| Toyota RAV4 | 2.5L I4 | 4.6 qt | 0W-16 | 2019-2026 |
| Toyota Tacoma | 3.5L V6 | 6.2 qt | 0W-20 | 2016-2026 |
| Ford F-150 | 3.5L EcoBoost V6 | 6.0 qt | 5W-30 | 2015-2026 |
| Ford F-150 | 5.0L V8 | 8.8 qt | 5W-30 (2020+; 5W-20 earlier) | 2015-2026 |
| Chevy Silverado | 5.3L V8 | 8.0 qt | 0W-20 | 2014-2026 |
| Dodge Ram 1500 | 3.6L V6 | 5.0 qt | 5W-20 | 2013-2026 |
| Dodge Ram 1500 | 5.7L Hemi V8 | 7.0 qt | 5W-20 | 2013-2026 |
| Ford Explorer | 2.3L EcoBoost I4 | 5.9 qt | 5W-30 | 2020-2026 |
| Jeep Wrangler | 3.6L V6 | 5.0 qt | 5W-20 | 2012-2026 |
| Nissan Altima | 2.5L I4 | 5.1 qt | 0W-20 | 2019-2026 |
| Hyundai Elantra | 2.0L I4 | 4.2 qt | 0W-20 | 2017-2026 |
| Hyundai Sonata | 1.6L Turbo | 4.2 qt | 5W-30 (2015-2019) / 0W-20 (2020+) | 2015-2026 |
| Mazda CX-5 | 2.5L I4 | 4.5 qt | 0W-20 | 2017-2026 |
| Chevy Malibu | 1.5L Turbo | 4.2 qt | 5W-30 | 2016-2026 |
| Subaru Outback | 2.5L H4 | 4.4 qt | 0W-20 | 2015-2026 |
| VW Jetta / Golf | 1.8L / 2.0L Turbo | 4.9-5.0 qt | 5W-40 (spec VW 502 00) | 2015-2026 |
| BMW 3 Series | 2.0L Turbo B48 | 5.6 qt | 5W-30 (LL-01) | 2012-2026 |
| Lexus RX 350 | 3.5L V6 | 5.7 qt | 0W-20 | 2016-2026 |
| Chevy Tahoe / Suburban | 5.3L V8 | 8.0 qt | 0W-20 | 2015-2026 |
Important: capacities vary by engine, oil cooler, and model year even within a nameplate. Use this chart for shopping and planning, then confirm the exact figure in your owner’s manual and always verify level on the dipstick after filling.
How to Use the Capacity Number Correctly
Capacity is a target, not a rule. Engines burn or carry over residual oil, so a change rarely takes the full listed amount in one pour. Add about half a quart less than the chart figure, run the engine for 30 seconds, wait five minutes, then top to the middle of the dipstick hash marks.
With Filter vs Without
The chart assumes a new filter, which holds a few tenths to half a quart. If you change oil without replacing the filter, subtract roughly 0.2 to 0.5 quart.
Oil Type Beats Brand
The viscosity column is the specification that matters. A store-brand 0W-20 meeting API SP protects better than a premium 5W-30 in an engine that calls for 0W-20. We break this down in synthetic vs conventional oil and 5W-30 vs 5W-20.
Step-by-Step Oil Change Guides by Vehicle
We publish full walkthroughs with torque specs, filter locations, and oil-life reset procedures. Popular ones:
- Dodge Ram 1500 oil change: capacity, reset, filter
- Chevy Silverado oil change steps
- Toyota Camry oil change step by step
- Mazda CX-5 oil change guide
- Hyundai Elantra oil change
- GMC Sierra oil change
- Lexus RX 350 oil change
- Chevrolet Malibu oil change
- Honda CR-V oil change and reset
- Toyota Corolla oil change DIY
Frequently Asked Questions
What happens if I overfill the oil?
Overfilling by more than about half a quart pressurizes the crankcase, can aerate the oil, and may blow seals or damage the catalytic converter. Drain the excess immediately; do not drive it off.
Is it bad to mix oil brands or viscosities?
In an emergency, topping with a different brand of the same viscosity is fine. Mixing viscosities changes the blend grade; see our full answer in mixing synthetic and conventional oil.
How much oil does a 4-cylinder vs a V8 take?
Typical four-cylinders take 3.5-5 quarts, V6s 5-6.5 quarts, and V8 trucks 7-9 quarts. The chart above lists exact figures for the 25 most common vehicles.
Do hybrids use the same oil capacity?
Hybrids often use low-viscosity 0W-16 or 0W-20 with capacities similar to their gas counterparts, but check our hybrid oil guide for hybrid-specific requirements.
You might also like: spark plug gap chart, OBD-II codes list, lug nut torque chart.
